VersaColor Inked Holiday Card Using Painter’s Tape!

(affiliate links provided below for most products at no additional cost to you.)

Good morning!  Kathy here, creating art for Imagine Crafts!  Today I have a new tutorial for you.  This is an OLD technique it is still fun, but messy!  What do you need?  A fabulous VersaColor Ink and some painter’s tape or any masking tape!

Skill Level-Intermediate/Time to complete 1 hour

Step 1

You will need a top-folding card base measuring 4 1/4 x 5 1/2“. You will also need another white panel measuring 3.75” x 5”.  Grab your masking tape and a VersaColor ink.  I used Cardinal.  At this point you can put on some gloves if you want but I didn’t.  I swiped the ink across a 5”piece of tap.  I then laid the tape across the white card stock panel, put a piece of copy paper over it and pressed.  I repeated this stripe 4 times.  I like the texture of the stripe.

Step 2

Next I smushed some of the Cardinal ink on my glass mat, added water and with a paint brush I splattered the panel.  I did the same with some gold water color paint.  Finally, I spritzed the Sheer Shimmer Craft Spray in Sparkle all over the panel.  Can you see the shimmer?  It is pretty!

Step 3

Next, I cut the panel with a die and added a piece of red stock to the back.  The red card stock is 1/4’’ larger than the striped panel.  Adhere with some On Point liquid glue.

Step 4

Now cut a hole from the panel and the red card stock you used for the frame.

Step 5

Cut a panel of white card stock slightly smaller than your main panel.  Add liquid glue to the back of the red circle.  Use your main panel as a guide, place over the white panel and press your circle into place.

Step 6

Cut a slightly larger circle from acetate or old packing and glue to the back of the main panel.  Add foam tape all around and add flat embellishments to the center.  I used gold confetti from Kat Scrappiness.

Step 7

Die-cut a few of the medium sized snowflakes from the Kat Scrappiness Snowflake Trio and glue together.  Then I used the Sheer Shimmer Craft Spray and spritzed the snowflake.  I also splattered it with gold water color paint.  It was still a bit too white so I pressed the snowflake into my Delicata Golden Glitz ink pad.

Step 8

Cut a circle frame using the die you used for the front panel and a slightly smaller one.  Glue this inside the cut out on top of the acetate. Adhere the snowflake on top of the acetate and allow to dry. Add a sentiment, I used the Christmas Stack Sentiment from LDRS Creative with the Sentiment Stack Shadow.  I glued these together and then popped it up with foam tape. I also added a few of the gold confetti around the outside of the card and some dots to the frame with a gold gel pen. I added foam tape to the back of the panel and adhered to an A2 top-folding, white card base.

I hope you enjoy this card and the tutorial. Thanks for stopping by I appreciate all of you! Please head over to the Imagine Crafts website to see all the beautiful products. Here is the link IMAGINE CRAFTS.

SUPPLIES

Imagine Crafts

Other

  • Kat Scrappiness Snowflake Trio
  • Circle Dies
  • LDRS Creative Christmas Sentiment Stack Stamp
  • LDRS  Creative Sentiment Stack Die
  • LDRS Creative Shadow Stack and Die
  • Essentials Rectangles for Stitching by Ellen Hutson
  • Kat Scrappiness Round Gold Confetti
  • Gold Gel Pen
  • Gold Watercolor Paint
  • Paint brush
  • Spellbinders Platinum 6 Die-Cutting machine
  • Colored card stock
  • Neenah Classic Crest Solar White 110lb
  • Paper Trimmer
  • Teflon bone folder
  • Foam Tape


Leave a Comment

Your email address will not be published. Required fields are marked *